Have any questions? info@maciejrogowski.com

Create a mortise and tenon

Mortise and Tenon Help

To create a mortise and tenon between two boards:

  1. Press the Mortise and Tenon button in the Solid > Modify panel.
  2. Select a board to cut the mortise.
  3. Select a face for the tenon.
  4. Specify the joint depth, length, thickness, offsets and number of tenons.
  5. Press the OK button.
1. Press the Mortise and Tenon button in the Solid > Modify panel.
2. Select a board to cut the mortise.
3. Select a face for the tenon.
4. Specify the joint depth, length, thickness, offsets and number of tenons.
5. Mortise and tenon.